| TENSIONING SYSTEM |
|
The tensioning system consists of wires, cables and all accessories that are needed to tighten the system and keep it tight. The wires connect the two ends of the row, and this creates a continuous support for the plants that you wish to grow. To guarantee the necessary support for fixing and tying plants, the wires will need to be perfectly tight and will need to be kept tight throughout the whole period of use, which averages around 30 years.The tensioning collars are fundamental for a perfect tightening of wires and cables. These elements also allow re-tightening during ordinary maintenance operations in a simple and quick way, so that it allows you to cut the costs of maintenance by ten times the amount: 20 hours of maintenance are needed for one hector of antihail, which is reduced to 2 hours if the system is equipped with wire-tightener collars.
|
|
| STRUKTURASTEEL WIRE |
|
Valente is the steel wire with a high content of carbon, coated with zinc and aluminium alloy. The high content of carbon guarantees best performance in terms of resistance and maintenance of mechanical and physical features of the wire throughout the entire duration of the system. The low level of stretching reduces the need for tightening throughout the system, which in any case results as being very practical if wire-tighteners are used. The STRUKTURASTEEL wire is coated with a layer of zinc (95%) and aluminium (5%) that makes the material highly resistant to corrosion, so much so that the wire lasts as long as the system does. DOWNLOAD TECHNICAL SHEET |
|
|
| STRUKTURAINOX WIRE |
|
STRUKTURAINOX is the Valente wire with an exceptional performance. Made using AISI 304 stainless steel with high carbon content and the addition of fine elements such as chrome, nickel and manganese, the STRUKTURAINOX wire is completely invulnerable to atmospheric agents and chemicals. Therefore this wire is suitable for zones with particularly harsh environmental conditions, such as close to the sea, or polluted industrial centres. Further features of the Valente stainless steel wire is the low stretchness, which reduces the need for tightening interventions. The steel used for the STRUKTURAINOX wire, is however, perfectly capable of resisting fatigue stress, such as tying and twisting for locking. DOWNLOAD TECHNICAL SHEET |
|
|
| ROOP STEEL CABLES |
|
Cables are used to connect the pile to the anchorage in anchor systems with a rear stay wire. They are also used to help stabilize antihail systems with longitudinal and transversal connections between poles. The cables are formed by intertwining galvanized steel wires. Thanks to the high thickness of the zinc, these cables guarantee high resistance, low stretching and durability over time, this way removing the need to re-tighten frequently or unforeseen maintenance. The quantity of wires varies according to the use and resistance that you wish to obtain. Normally cables are used in steel and are made up of 19 intertwined wires. DOWNLOAD TECHNICAL SHEET
|
|
|